TRI STATE TECHNICAL
HVACr and Alternate Energy Solutions
Shaver Wood



                   

We are an Authorized Dealer of Shaver Wood Systems.

Shaver Outdoor Wood Furnaces provide hot water to be used in conjunction with existing forced air or radiant heating systems. 

  • The chance of carbon monoxide build-up in your home is totally eliminated by using wood in an outside furnace.. 
  • The chance of a gas explosion from your furnace in your home is eliminated because all burning takes place outside now.. 
  • Indoor pollutants of harmful gases and fumes are eliminated. 
  • Eliminates the chance of chimney and flu fires from your furnace or fireplace.. 

Lower utility bills dramatically! Wood is very cheap or in many cases FREE! You can eliminate your gas, oil or electric heating bill simply by using a Shaver Outdoor Wood Furnace. Wood hasn't gone up in price for years and is very plentiful. In many cases our customers have enough wood standing (and falling) on their property to keep them in firewood for life!

 Stop that upcoming huge energy bill NOW!


- The Shaver removes dangerous fire hazards from your home or other building because all of the burning takes place outside, away from the house. Our furnace is made to be situated out in the yard, away from the house. The usual distance is 50 to 120 feet but can it be as close as 10 feet or as far away as 200 feet (or more). 

 - Outdoor furnaces remove the dangers of wood stove fires in the house. Any fire department that compares the safety of indoor units versus outdoor ones will declare hands down that outdoor furnaces are the winners. This safety feature is usually reflected in lower insurance rates. In fact many insurers won't insure a home that has wood only heat (indoors). 

 - With no circuit boards and electronics and no fan on the front door, our unit is simpler and safer.
  

The Shaver Furnace is all about easy maintenance and fewer parts requiring service. You don't need costly electrical gadgets and gizmos to cause you problems down the road. This is a proven design of over 36 years!

"Keep it simple and efficient", is our motto. 

  


Good News!

$1500 Federal Tax Credit Eligible!

The 2009 Recovery Act (ARRA) provides a 30% federal tax credit (up to $1500) on the purchase of a Shaver Pro Series unit between January 1, 2009 and December 31, 2010. The credit applies for a homeowner's primary residence only.

Up to $1500 Federal Tax Credit!

US Federal Government Provide a 30% Tax Credit
for the Purchase and Installation of a High Efficiency Biomass Stove

On February 17, 2009 President Obama signed into law, H.R. 1, the American Recovery and Reinvestment Act (ARRA).  This economic stimulus legislation includes a 30% tax credit (up to $1,500) for the purchase in 2009 and 2010 of a 75%-efficient biomass-burning stove as measured using a lower heating value.

The Internal Revenue Service (IRS) issued the guidelines for determining what stoves meet the efficiency requirements to qualify for the credit on June 1, 2009. In summary, to qualify a homeowner must:

  1. Purchase and install a SHAVER Pro Series 165 in either 2009 or 2010.
  2. Save the purchase receipt
  3. Print and Save a copy of the Weld Rite Inc. certification for the SHAVER unit you purchased. Click here for certificate if your dealer has not provided it to you
  4. Claim the tax credit associated with your qualifying purchase on your
    federal filing for the 2009 and/or 2010 tax year.

    Details of the Tax Credit

    1. Tax credit is 30% of the amount paid for the qualifying product up to
        a maximum of $1500 combined for 2009 and 2010.
    2. The credit applies to the homeowner's primary residence only.
    3. A tax credit is a dollar-for-dollar reduction subtracted from your
        tax liability. Therefore, up to $1,500 can be subtracted directly from the
        amount of tax that is owed.

    This summary information is provided as a convenience and may not be relied upon as a substitute for professional tax advice. Tri State Technical is not a tax advisor. Taxpayers claiming a tax credit should consult a tax professional with any questions.

 


  Some specs on the Shaver units:

Shaver Pro Series 165* -  45" x 54.5" x 90" tall   1600 lb 
 Shaver Pro Series 250   -  45" x 70.5" x 90" tall    2000 lb  
Shaver Pro Series 290   -  45" x 78.5" x 90" tall    2300 lb
Shaver Pro Series 340   -  45" x 88.5" x 90" tall    2600 lb 

FIREBOX SIZES
Model  Description  Width¹  Depth   Height (approx)
165 cylinder 36” 34” 26” + 9” for Ash Pan*
250 cylinder 36” 50”  26” + 9” for Ash Pan*
290 cylinder 36” 58”   26” + 9” for Ash Pan*
340 cylinder 36” 68” 26” + 9” for Ash Pan*
* non-removable ash pan. Easy to clean out with its own door!     

We offer 5 sizes of wood boiler furnaces

PLEASE NOTE:  As of May 1, 2010, Shaver has increased their prices by $300.00 per unit due to the increased price of steel. 

Mention that you saw our website on the web and you can receive $100 off your Shaver order when you order through TRI STATE TECHNICAL!  Please be sure to reference
 "Web Special 100" when placing your order.

Shaver Pro Series 165   
165,000 BTU and a 170 gallon water tank
~will heat up to 4,000 sq ft.
 of well insulated space~
OUR MOST POPULAR SIZE!
$4,977.00*

Shaver Pro Series 250   

240,000 BTU and a 230 gallon water tank.  
~will heat up to 5,500 sq ft. of well insulated space~
 
$5,877.00*

Shaver Pro Series 290   

280,000 BTU and a 260 gallon water tank.  
~will heat up to 7,000 sq ft. of well insulated space~
$6,227.00*

Shaver Pro Series 340  
 
326,000 BTU and a 300 gallon water tank. 
~will heat up to 8,000 sq ft. of well insulated space~
$6,877.00*

*PLUS SHIPPING/DELIVERY @ .65/mile curbside and if a pad delivery add $75.00


 We are currently working on an online store where you can order and purchase the unit online.  Until this project is completed, if you would like to order a Shaver Outdoor Wood unit, we will be glad to process your order via phone.  Please call the office or email us for a price quote. 
Thank you.
We accept MC & Visa with NO surcharge or hidden fees!


 

 

  Tri State Technical is able to offer straight financing or 90 days "same as cash" financing

Need financing?

 

Straight Financing

Calculated with monthly payments based on 12, 24, 36, 48 months.
Payments start 30 days after signing of contract.
Interest rate is fixed for the term of the loan.
Interest starts at the time of the contract.
No pre-payment penalty.


90 Days same as cash

90 DAYS - NO INTEREST & "0" DOWN*

Monthly payment required. Simply payoff the finance amount
within 90 days and there is NO INTEREST!
If the principal amount of the contract IS NOT paid within the NO INTEREST period, the finance charge will accrue from the date of signed contract.
No pre-payment penalty.
  

 

 

Finance programs and approvals are based upon the applicant's credit history.


  

Cutaway illustrations of the unit                           

 


Free fire poker with every unit!


 
Every Shaver Unit comes with a 20+ limited warranty.


 All new manufactured orders are running on a 6-8 week turnaround from date of payment/order.

Don't want to wait for a custom Shaver unit to be manufactured just for you?  Shaver has some pre-made units in stock and can deliver them to you within 2-3 weeks of payment/order!!  Call for details!! 
Hurry they are going fast!!


  You can choose from 20 different COLORS with 8,000 different color combinations!

Choose your roof color, roof trim color, sides/front/back color and corner trim color




Below are some examples of unit color choices/color combinations that customers have chosen for their units  -


Click on the Shaver logo below for other facts
and FAQ's pertaining to Shaver units
{a new window will open}

 

TRI STATE TECHNICAL makes available the Heat Exchangers for your indoor furnace or boiler which are needed to complete your new Shaver unit.
  Click HERE for options available.

 
We also offer hanging modine type units for garages or outdoor buildings and they are available for shipping to your location.  Call for current availability and pricing.